73 kWh High Performance Electric Vehicle Kit (364 Vdc 200Ah) - Used Tesla Batteries

Please click here to review our EV Kit FAQ section

The initial $450 includes (3) Hours of Engineering Consultation. This allows our team to determine if this is the right kit for you and answer all of your technical questions before purchasing a kit. The remaining time can be used for installation and technical questions once you receive your kit. Once we have answered your questions we will provide you with our wire transfer information to complete the purchase. Please feel free to reach out to sales@evsource.com with any questions.

Kit Price:

35 kWh EV kit without Accessories: $41,286.00
35 kWh EV kit with Accessories: $41,677.00

Description:

The 73 kWh kit is one of our most powerful EV Kits! A Danfoss PP160 (previously known as UQM) motor has been paired with Used Tesla Batteries to create a 73 kWh EV Conversion Kit. This combination can support a vehicle with a curb weight of up to 4000 lbs or more if gear reduction is implemented. In addition to this, we have included our new Lithium Block 6.6 kW Charger that has an integrated 1 kW DC-DC Converter.

We recommend reaching out to our sales team if you have any questions relating to suitability and compatibility for your EV project prior to checking out. Not all of the components that you will need to convert your vehicle will be included in this kit such as the transmission adapter, battery box, power steering, etc. Once you purchase a kit our team will assist with making recommendations for any components that are not included. 

EV Source sells components and kits, we do not assist with the installation of EV Kits and we are unable to make a recommendation for EV Kit installations, it is your responsibility to research and find a qualified technician. 3 Hours of Engineering Consultation is included with the purchase of each kit. This allows kit owners to spend one-on-one time with an engineer to ask detailed technical and installation questions. Engineering Consultations are usually completed over the phone or over a video call with a qualified engineer. If you have any additional questions regarding Engineering Consultations please feel free to reach out to our team at sales@evsource.com. 

Lead time: 6-12 weeks 
Call to confirm the Lead time

Kit Specifications:

Energy 35 kWh
Nominal Pack Voltage 338.4 Vdc
Charge Voltage 394.8 Vdc
Capacity 105 Ah
Pack Configuration 94S3P
Battery Pack Weight 367 lbs


System Specifications:

Operating Speed 0 - 10000 rpm
Maximum/ continuous power 160 kW/ 90 kW
Maximum/ continous torque 350 Nm/ 170 Nm
Peak Efficiency 95%
Operating Voltage 250 - 530 Vdc
Communication CANbus


Motor Performance:

Peak Power 215 hp
Continuous Power 120 hp
Peak torque 258 lbf ft
Continuous torque 125 lbf ft
Maximum efficiency 95%
Power density 1.95 hp/lb
Lenght 9.2 in
Diameter 11.25 in
Weight 110 lbs


Controller Performance:

Operating Voltage input range 250 - 530 Vdc
Minimum Voltage limit 250 Vdc
Nominal Voltage 350 Vdc
Maximum Voltage 530 Vdc
Input current limitation 500 A


Included in this Kit:

Motor: (1) UQM Danfoss PP160 Motor and Controller

Batteries: (282) 1S10P Lithium Block Batteries
1S10P Lithium Block Battery Specifications Sheet

BMS: (1) Orion 02 Standard 96 Cell Kit

Charger: (1) Elcon 6.6 kW Charger with CAN  

DC-DC Converter: (1) 1500W Elcon DC-DC Converter 

Display: (1) Andromeda EVIC

Cooling: (1) Performance Cooling Kit

J1772: (1) J1772 Inlet 

Hall Effect Pedal: (1) NGM Throttle Pedal Assembly 

Braking kit: (1) Electric Braking Kit

Engineering: (3) Hours of Engineering Consultation

Optional Accessory Component Add-On:

Welding Cable: (50) FT 2/0 Orange Ultraflex Welding Cable 

Lugs: (20) 2/0 Magna Lugs 

Heatshrink: (3) FT 3/4" Standard Red & (3) FT 3/4" Standard Black 

Fuse: (1) A30QS500 Ferraz Fuse 

Fuse Holder: (1) P243G Ferraz Fuse Holder 

Please note: Additional Accessories for the Lithium Block Battery (busbars, busbar covers, brackets, etc.) should be purchased separately once the final configuration is determined.