Orion Battery Management System RS232 to USB Adaptor

Sabrent

RS-232 Cable Adapter

$25.00
Quantity:

Description:

Compatible with the Orion BMS JR. 

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller

RS-232 Cable Adapter – Essential Tuning & Diagnostic Access for EV Controllers

Direct Communication. Reliable Data Transfer. Field-Tested Compatibility.

The RS-232 Cable Adapter is a vital tool for electric vehicle builders, tuners, and technicians who need direct serial communication with motor controllers, battery management systems, or other RS-232 compatible EV components. Whether you're configuring parameters on a NetGain Hyper 9 controller, updating firmware, or conducting field diagnostics, this rugged and reliable adapter ensures a stable and accurate connection between your laptop and your EV system.

This adapter converts a standard RS-232 DB9 serial connection to a USB interface, allowing use with modern computers and tuning software packages. Fully tested for compatibility with SME/Curtis controllers, Orion BMS, and other popular EV hardware, it’s a must-have in any EV builder’s toolkit.

🔌 Key Features:

  • DB9 Serial to USB Conversion: Allows modern laptops to interface with legacy RS-232 ports

  • Plug-and-Play Setup: No soldering or manual wiring required – just connect and go

  • Driver Support: Compatible with Windows, macOS, and Linux (Prolific or FTDI chipsets depending on model)

  • Stable Baud Rate Performance: Supports full-speed communication for tuning, diagnostics, and firmware updates

  • Rugged Construction: Molded strain reliefs, gold-plated connectors, and shielded cabling

  • LED Indicators (on select models): Transmit/Receive activity for visual feedback

🔩 Technical Specifications:

  • Connectors: DB9 male (RS-232) to USB Type A

  • Chipset: FTDI or Prolific (based on model availability; FTDI preferred for controller tuning)

  • Cable Length: 3 ft (0.9m) standard; extended lengths available

  • Baud Rate Support: Up to 1 Mbps

  • Operating Temp: –10°C to +70°C

  • Power: USB bus-powered

🛠️ Ideal For:

  • Hyper 9 & Hyper 9HV Motor System Tuning

  • Curtis/SME Motor Controllers

  • Orion BMS Jr. & Orion 2 Setup

  • Battery Charger Firmware Updates

  • Diagnostic Logging & Parameter Adjustments

✅ Why Choose the RS-232 Adapter from EVSource?

At EVSource.com, we only stock RS-232 adapters that have been verified to work with common EV control systems. We eliminate the guesswork—no more worrying about chip compatibility, driver issues, or poor signal quality. Our adapters are tested in-house for seamless integration with the same tools we use in our lab and in real-world builds.

🧰 Available Add-Ons:

  • USB Extension Cables (6ft–15ft)

  • RS-232 Null Modem Adapters (for controller-to-controller communication)

  • CAN-to-USB Interface Cables (for Orion BMS or other CANbus tuning)

  • Preloaded Driver Installer Flash Drive (for offline or legacy system use)

  • Hard Case Storage Kit for Field Technicians

💻 Build, Tune, Diagnose – With Confidence.

Whether you're setting throttle curves on a Hyper 9, adjusting regen on a Curtis controller, or updating your BMS, the RS-232 Cable Adapter is the critical link between your PC and your powertrain.