27 kWh Standard Performance Electric Vehicle Kit (135Vdc 200Ah) - Used Tesla Batteries

Please click here to review our EV Kit FAQ section

The initial $450 includes (3) Hours of Engineering Consultation. This allows our team to determine if this is the right kit for you and answer all of your technical questions before purchasing a kit. The remaining time can be used for installation and technical questions once you receive your kit. Once we have answered your questions we will provide you with our wire transfer information to complete the purchase. Please feel free to reach out to sales@evsource.com with any questions.

Kit Price:

27 kWh EV kit without Accessories: $18,121.00
27 kWh EV kit with Accessories: $18,512.00


The 27 kWh AC Electric Vehicle Kit was designed with small to medium-sized vehicles in mind that have a curb weight of up to 3500 lbs. We chose to include Used Tesla Model S Batteries in this kit to provide an affordable alternative. The Tesla Batteries usually have an average of 50,000 miles, however, this does differ from pack to pack. The components in each conversion kit have been hand-selected by our team and matched to ensure compatibility so your build goes as smoothly as possible. All of the components included in our kits are CAN-driven and are either programmed by the manufacturer or have the ability to be programmed by the end-user. This kit does not provide a plug-and-play solution to end-users as hand and electronic tools will be required. 

We recommend reaching out to our sales team if you have any questions relating to suitability and compatibility for your EV project prior to checking out. Not all of the components that you will need to convert your vehicle will be included in this kit such as the transmission adapter, battery box, power steering, etc. Once you purchase a kit our team will assist with making recommendations for any components that are not included. 

EV Source sells components and kits, we do not assist with the installation of EV Kits and we are unable to make a recommendation for EV Kit installations, it is your responsibility to research and find a qualified technician. 3 Hours of Engineering Consultation is included with the purchase of each kit. This allows kit owners to spend one-on-one time with an engineer to ask detailed technical and installation questions. Engineering Consultations are usually completed over the phone or over a video call with a qualified engineer. If you have any additional questions regarding Engineering Consultations please feel free to reach out to our team at sales@evsource.com. 

Lead time: 2-6 weeks 
Call to confirm the Lead time

Kit Specifications:

Energy 27 kWh
Nominal Pack Voltage 136.8 Vdc
Pack Charge Voltage Cut-off 151.2 Vdc
Capacity 200 Ah
Pack Configuration 6S1P
Battery Pack Weight 330 lbs

Motor Specifications: 

Nominal Voltage 100V Nominal
Current 750 Amp
Efficiency Peak 95%
kW Peak 95 @ 125V
kW Continous 38 @ 3,300 RPM
RPM Peak 8,000
Torque 173 lbs.-ft @ 0 RPM
Regen Yes, Tailorable
Motor Diameter 8.66"
Motor Lenght 13.976"
Motor Weight 130 lbs.
Controller Weight 9 lbs.
Shaft Single-Ended, Keyed
Mounting B-Face
Insulation Class H
Software SmartView

Included in the Kit:

Motor:  (1) Hyper 9 HV Motor

Batteries: (6) Tesla Lithium Battery - 85kWh

BMS Board: (6) BMS Boards 

BMS: (1) Orion 02 Standard 36 Kit

Charger: (1) Eltek 67.115.0 Battery Charger

Converter: (1) 1000W IP67 Sealed DC-DC Converter 

Display: (1) Andromeda EVIC

Cooling: (1) Performance Cooling Kit

J1772: (1) J1772 Inlet 

Hall Effect Pedal: (1) NGM Throttle Pedal Assembly 

Braking kit: (1) Electric Braking Kit 

Contactor: (1) GV200MA Gigavac Contactors 

Engineering: (3) Hours of Engineering Consultation 

Optional Accessory Component Add-On: 

Welding Cable: (50) FT 2/0 Orange Ultraflex Welding Cable 

Lugs: (20) 2/0 Magna Lugs 

Heatshrink: (3) FT 3/4" Standard Red & (3) FT 3/4" Standard Black 

Fuse: (1) A30QS500 Ferraz Fuse 

Fuse Holder: (1) P243G Ferraz Fuse Holder