Included in the Orion BMS Jr. (with CAN) kit:
-Main Controller
-16 Cell Tap Harness
-Input/Output Harness
-Shunt (200A or 500A)
-3 Thermistors
Description
-Supports from 1 to 16 cells in series
-Designed for Lithium Ion battery packs up to 48V nominal (60V max)
-Centralized design provides high EMI and noise immunity.
-Performs intelligent cell balancing (passive).
-Calculates state of charge (SOC).
-Calculates discharge current limit (DCL) and charge current limit (CCL).
-Can measure cell voltages between 0.5v and 5.0v.
-Optional CANBUS 2.0B interface (fully programmable).
-OBD2 diagnostic protocol support.
Specifications
- Troubleshooting Guide
- Wiring & Installation Manual
- Operation Manual
- Purchasing Guide
- Quick-Start Guide
- Software Utility Manual
Designed Use
Designed for Lithium Ion battery packs up to 48V nominal (60V max)
Individual cell voltage rating: 0.2v to 5v per cell tap
Supports from 1 to 16 cells in series
-40C to 80C operating temperature range
Integrated low loss passive cell balancing to within 10mV
Cell voltage resolution of about 1.5mV
Applications
Light mobile applications (scooters, golf carts, etc.)
Solar & wind energy storage
Uninterruptible power supply
Battery backup
Basic Functions
Over-voltage and under-voltage protection
Over-current protection
Temperature protection
Intelligent cell balancing
State of charge monitoring
State of health monitoring
Additional Functions
Data logging capabilities
Stored diagnostic information
Programmable interfaces
Current limit calculations (intelligent current limiting)
Stored battery usage statistics including histogram data
Display Options
Interfaces with third party smartphone software (CAN version only)
Optional basic state of charge display
Optional data logging display