|
|
Zilla Z1K and Z2K Liquid Cooled Electric Vehicle Motor Controllers
Zilla controllers are back on the market! The new units are the same caliber controller you'd expect from Cafe Electric. With proven reliability, you can't go wrong with a Zilla!
Each controller comes as a kit which includes the items shown below: Hairball unit, Liquid cooling ports (cooling kit sold separately), cords, diodes, and connectors. |
Full Kit |
Liquid Cooling Ports |
Hairball Unit |
|
Unit Type
by Current Output |
|
Z1K - 1000 Amp
|
Z2K - 2000 Amp
|
Options |
300V |
348V |
300V |
348V |
| Standard Unit - No Options |
#201-Z1K-HV
|
#201-Z1K-EHV
|
#201-Z2K-HV
|
#201-Z2K-EHV
|
| With Hall-Effect Pedal , -P |
#201-Z1K-HV-P
|
#201-Z1K-EHV-P
|
#201-Z2K-HV-P
|
#201-Z2K-EHV-P
|
| With Hall-Effect Pedal Option and Series/Parallel, Reversing, -AP |
#201-Z1K-HV-AP
|
#201-Z1K-EHV-AP
|
#201-Z2K-HV-AP
|
#201-Z2K-EHV-AP
|
| With Series/Parallel, Reversing Option, -A |
#201-Z1K-HV-A
|
#201-Z1K-EHV-A
|
#201-Z2K-HV-A
|
#201-Z2K-EHV-A
|
| With Sparrow Contactor, -S |
#201-Z1K-HV-S
|
#201-Z1K-EHV-S
|
#201-Z2K-HV-S
|
#201-Z2K-EHV-S
|
|
Description of Options
- Standard unit with no options: uses a 0-5kohm throttle input.
- With Hall-effect pedal option, -P: uses the Hall-effect pedal assemble (HEPA) for throttle input.
- With Hall-Effect Pedal Option and Series/Parallel, Reversing, -AP: has provision to control series/parallel motor shifting, as well as reversing control for electronically-controlled reversing applications. Also uses the Hall-effect pedal assemble (HEPA) for throttle input.
- With series/parallel, reversing option, -A: same as -AP above, except uses a standard 0-5kohm throttle input instead of the Hall-effect pedal.
- With Sparrow contactor option, -S: this option is necessary for upgrading a Sparrow electric vehicle to a Zilla to provide compatibility with the Sparrow contactor configuration.
Additional Information
- A PC adapter is included with your order. If you'll be using a Palm, an adapter can be purchased from our site.
- A 3' cord from the Hairball to your interfacing device (Palm or PC) is included. A 7' cord is sold separately on our site if a longer cord is required.
- Our own Zilla liquid cooling kit can greatly simplify the liquid cooling process. Get $50 off when purchasing with a Zilla!
- Use specified fuse only - purchase recommended fuses on our Controller accessories page.
- Upon special request, the Zilla Godzilla graphic can be inverted.
- Zilla User Manual in PDF format
- Use 5/16" lugs with 1/4" bolts for cable connections to Zilla. Lugs can be purchased on the lug page of our cabling section in the Top-Line Shop
|
| |
|
|
|
Product Finder - Top-Line Shop
Good Reading
|
|