Choose a Category
Electric Power Steering Pump Kit
This power steering pump works great in most vehicles as a replacement for the belt-driven power steering pump. Very little modification is required to adapt the existing power steering lines to accommodate the pump. It runs on 12 volts, and requires a stout 12V system to handle the surges of 40- 50 amps when the pump is working its hardest. High pressure fittings are -6 AN.


  • 12V
  • Minimum pressure of 711psi
  • Maximum pressure of 1000psi
  • Continuous current: 12A
  • Peak current: 60A
  • Flow: 1.7gallons/minute
  • Dimensions: 8x6x6 inches
  • Weight: 12lbs 8oz

Note: Steering system fluid should be flushed & replaced with the OE recommended fluid. It's advised that power steering hoses be replaced on vehicles over 5 years old or high mileage vehicles.

Kit includes:
-Pump mounted to aluminum bracket
-SB-50 Anderson connector
-Circuit breaker
-High Pressure hose
-Low pressure hose
-Hose Fittings

Wiring & Tubing Diagram

Kit Details


2015 www.evsource.com
Logan, Utah USA