|
HF/PFC 3kW Charger for 72 - 156V Systems
|
This feature-rich, high-power charger is exactly what the EV community needs for 72 to156 volt conversions. Its low cost together with its power and features makes it attractive to both first-time converters and experienced EV'ers. The charger is isolated, making it very safe to use. This also allows multiple units to be used on higher voltage packs, such as two set at 144V on a 288V pack. A wide input voltage range and automatic scaling back of power on 120VAC circuits makes it extremely versatile. This charger won't overcharge your pack, and the smart charging algorithm intelligently charges the pack to full capacity. It doesn't require any fans, and is completely sealed. All these features and more, combined with its affordable cost, make it a great battery charging solution!
|
|
(Shown with optional red aluminum cover, extra $50 charge - standard is yellow steel) |
Features & Options: - 90-260VAC input possible without any modifications to the charger
- Short circuit protection
- Sealed enclosure - heatsink design without noisy fans
- Automatic reduction of power draw on 120VAC input to 1500W
- User-friendly connectors on input and output. (No hard-wiring required)
|
Technical Specifications:
- 3kW AC draw
- ~92% efficiency
- Various amp-hour settings
- AGM/Flooded algorithms
- Pulse charging during final stage
- Temperature compensation with included external temperature sensor
- Output isolated from AC mains
- Greater than 0.98 power factor (current and voltage between 1 and 2 degrees out of phase)
- Input frequencies of 45-65Hz
- Weight of about 21 lbs
- Reverse polarity protection
- Automatic restart when below about 12.5V or after 30 days
- Dimensions (L x W x H): 13.85 x 6.9 x 5.5 inches, 352 x 175 x 139 mm
144 &156V Chargers are loaded with 10 algorithms or charging curves shown here
Charging Curves
|
|
Instruction & Installation Manual |
Nominal Voltage/Amp Output |
72V/32A
|
96V/24A
|
120V/20A
|
144V/16A
|
156V/14A
|
Base Charger |
|
|
|
|
|
Add CANbus |
|
Optional Red Cover |
|
Lead Time: 1 week
|